Huawei e220 drivers for windows 7 64bit ~ #bagasadeta

Nowadays, many people uses Huawei HSDPA modems for connecting to the internet. Among huawei modems, E220 modem is very popular modem in the world since E220 have an internal antenna. However, sometimes when you install E220 modem on Windows Vista or 7 64bit, the modem doesn't detect by the system due to incompatible drivers. It's very difficult to install drivers on those kinds of systems. Therefore, I found a trick to install drivers on Windows Vista or 7 which can be used to detect E220 modem on your PC or laptop.
First, download the Huawei E220 driver from the link below and extract it into a folder.

Get Huawei drivers for E220 modem

Take your pen drive and copy that folder into the pen drive and remove the pen drive from USB. Now, connect the E220 modem to the USB port and again insert pen drive to another USB port. Go to the Huawei driver folder inside the pen drive and double click on the DataCard_Setup64.exe file (if your PC's operating system is 64 bit, otherwise double click on DataCard_Setup.exe).

It will open a window to install mobile partner so install the application to the PC.

After install the application, remove the modem from USB and re-connect again and go to the device manager.
Control Panel > System > Device Manager
Remove any USB device which connects to USB ports (Remove the Pen drive) except the E220 modem.
In the Device Manager, double click on the Universal Serial Bus Controllers. Here you can see USB Mass Storage Device as shown in figure below.

Right click on the USB Mass Storage Device and select Update Driver Software. Then, choose
Browse My Computer for Driver Software.

Now, click on "Let me pick a list of device driver on my computer" for manually installing the driver and click Next to continue.

In the new window, untick the Show compatible hardware

Here, it is required to click on the the (Standard USB Host Controller) in the left side under the Manufacturer. Hence, you can see in the right side under the Model, there is a model called USB Composite Device. Click on this USB Composite Device and click Next to continue.

Hence, it will install the drivers to the PC. During this installation, a message pop up in the taskbar as shown in the figure below. Click on that message to see details of drivers which was installed.

It should open the details of the drivers. You can see there are some new drivers added. Now, your device is ready for use in Windows 64bit system. Reconnect the modem to the USB and run the mobile partner. It will detect your modem successfully.